Frequently Asked Question

QG65/76 series analog output (inclination/acceleration/tilt switch)

To configure sensors from this series DIS sensors has developed a tailor-made configurator. This configurator is connected to the sensor and the RS232 port (or optional USB port) of your PC. A special program will show all the options available.

The tool is capable to reconfigure calibrated QG65/QG76 sensors with a standard PC. It can read the actual sensor settings, shows all relevant parameters, and offers the possibility to reconfigure the device while keeping the calibration data.

Manuals and the software can be found in the attachments.

Optional: the RS232 protocol developed for this configurator can also be used by end customers. It turns the sensor from an analog output sensor into an RS232 output sensor. The sensor functions as a slave and gives angle information via RS232 on request only. Protocols can also be found in the attachments.