Frequently Asked Question

Firmware release notes for sensor family: QGxxD CANopen (H-type)
Last Updated a year ago


Release date: 20230726

This document is valid for:
    • QG65D CANopen Dynamic Inclinometer
    • QG76D CANopen Dynamic Inclinometer

    Known issue, scheduled for new releases Temporary workaround
    The 2 bytes in object 1003h (predefined error register) containing 'manufacturer error data' are currently swapped. The emergency message itself is OK.

    Ignore 1003h or ‘swap back’ after reading
    Store parameters object 1010h subindex 02h, 03h, 04h not implemented according CiA standardUse object 1010h subindex 01h to store each parameter

    Firmware version number Changes with respect to previous version Date of release
    V2.1.0
    		Functionality added to allow freedom in mounting positions.
    Updated objects for automated factory calibration in LAB4.
    Various minor updates.    		July 21th 2023
    V1.0.0

    Subrange functionality added for 1-axis vertical sensor (object 3032h).
    Selectable resolution functionality added (object 6000h)

    		February 22th 2022
    V0.6.1

    Bugfix: small risk of oscillating sensor eliminated.
    Improved algorithm to reduce slowly growing offset error.

    CAN object dictionary optimized



    		October 19th 2021
    V0.3.12Improved dynamic algorithm in slow moving situationsMay 25th 2021
    V0.3.4Initial releaseDecember 1st 2020

    Please Wait!

    Please wait... it will take a second!